AC (Alternative Current) and DC (Direct Current), two types of current.
Before starting to present different types of sockets, talk first about current.
Two types exists for the electric car charging :
- Alternative current (AC) is currently used to charge slowly et fast.
- Direct current (DC) is reserved for high power is use to charge rapidly.
At home socket
Found at your home or in your garage, the socket three pins is the easy way of charging your electric car.
Most manufacturers provide one cable allowing you to plug your electric car into the three pins socket. However, be sure to have your home electric installation checked by a professional electrician. Ideally your socket should be linked to your own circuit breaker.
Undoubtedly this is the easiest and cheapest way of charging your electric car, but it’s also the longest and slowest way of charging it.
The cable limits the authorised power to no more than 2Kw. You will need about 20 hours to recharge a 50 KwH electric car battery. There is on the market a reinforced socket with a specific cable to allow a charge which can exceed 3Kw.
Type 2 Socket
This socket is limited to electric cars, it’s also today the European standard for charging the alternative current which is suitable for both slow and fast charge.
Considered as a intermediary between the home’s socket and the High power charging, the Type 2 socket receives more power which reduces the charging time. It’s also made to be installed at your home or in public charging points such as car parks or parking spaces.
The accepted power depends on the charging point configuration but also on the charger inside the electric car.
Actually most of the electric cars have a 7Kw integrated as standards although some such as the Renault ZOE accept up to 22Kw.
The Type 2 Socket is also used for the rapid charge.
Tesla also uses type 2 socket standard configuration on its superchargers network. Used for Model S and Model X, it delivers 100 Kw.
Type 3 socket
This socket has been used from 2010 and allows up to 22 Kw AC charge but is now disappearing from the charging points network replaced by Type2 socket.
This socket is dedicated to high power fast charging the Combo socket CCS is the European standard for charging in direct current (DC).
It uses the same charging point as the Type 2 socket but the Combo Combined Charging System (CCCS) is fitted in all new electric cars.
Some motorways in the UK renovated their charging point network to allow only the Combo CCS socket. The M25 (Greater London) Motorway’s charging points do not have Type 2 sockets anymore since the beginning of 2020.
Present in almost all motorway networks in Europe the Combo Combined Charging System (CCCS) reduces considerably the charging time.
On most recently launched electric cars the charging power is usually 100 Kw or more. The highest performing cars can even accept charging of more than 250 Kw allowing for 80 percent charging in 15 to 30 minutes.
Created in 2010 in Japan, the CHAdeMO was one of the first rapid charger sockets. As distinct from the dedicated connector which uses alternative current (AC), the CHAdeMO standard accepts power up to 400 Kw in its latest version.
The CHAdeMO socket is also compatible with the V2G (Vehicle To Grid) which allows all of a part of the energy in the electric car battery to be restored to the grid.
Widely used in electric cars which was launched in the years following 2010, the CHAdeMo socket has largely been replaced in new cars by the Combo (CCS). The Combo (CCS) has increased its market shares in Europe